In thi is exercise, we examine in detail how an instruction is executed in a single-cycle datapath. problems in this exercise refer to a clock cycle in which the processor fetches the following instruction word: oxf80140f2. what are the outputs of the sign-extend and the "shift left 2" unit (near the top of figure 4.23) for this instantaneous word? what are the values of the alu control unit'sinputs for this instruction? what is the new pc address after this instruction is executed? highlight the path through which this value is determined. for each mux, show the values of its inputs and outputs during the execution of this instruction. list values that are register outputs at reg [kn. what are the input values for the alu and the two add units? what are the values of all inputs for the register unit?
Answers: 3
Other questions on the subject: Physics
Physics, 21.06.2019 23:30, ladawnrowles005
Two technicians are discussing a resistance measurement between the can-h and can-l wires. technician a says this measurement should be done with the ignition switch in the "run" position. technician b states that a measurement of 0 ohms indicates an open in the network. which technician is correct?
Answers: 3
Physics, 22.06.2019 00:20, nini261
2.22/3.33 points | previous answers tamucolphysmechl1 4.pre.002. ask your teacher my notes question part points submissions used on a frictionless air track, a blue glider with mass 0.200 kg is moving to the right with a speed of 8.00 m/s. it strikes a red glider that has mass 0.600 kg and that is initially at rest. after the collision, the blue glider is moving to the left with a speed of 2.40 m/s. (a) what are the magnitude and direction of the velocity of the red glider after the collision? magnitude 3.33 m/s correct: your answer is correct. direction correct: your answer is correct. (b) is this collision elastic?
Answers: 1
Physics, 22.06.2019 00:50, gungamer720
Acave rescue team lifts an injured spelunker directly upward and out of a sinkhole by means of a motor-driven cable. the lift is performed in three stages, each requiring a vertical distance of 10.0 m: (a) the initially stationary spelunker is accelerated to a speed of 4.90 m/s; (b) he is then lifted at the constant speed of 4.90 m/s; (c) finally he is decelerated to zero speed. how much work is done on the 68.0 kg rescue by the force lifting him during each stage?
Answers: 1
Physics, 22.06.2019 14:10, kortetsosie8813
Match these items. 1. coulombs __force 2. ohms __emf 3. centimeters __resistance 4. newtons __charge 5. volts __length
Answers: 1
You know the right answer?
In thi is exercise, we examine in detail how an instruction is executed in a single-cycle datapath....
Questions in other subjects:
Computers and Technology, 19.09.2019 08:30
Geography, 19.09.2019 08:30
