subject
Physics, 14.07.2019 00:10 saucyboyFredo

This problem has been solved!
see the answer
1) stokes' law describes sedimentation of particles in liquids and can be used to measure viscosity. particles in liquids achieve terminal velocity quickly. one can measure the time it takes for a particle to fall a certain distance and then use stokes' law to calculate the viscosity of the liquid. suppose a steel ball bearing (density 7.8 ✕ 103 kg/m3, diameter 2.0 mm) is dropped in a container of motor oil. it takes 16 s to fall a distance of 0.80 m. calculate the viscosity (in kg/(m·s)) of the oil.
2) calculate the maximum deceleration (in m/s2) of a car that is heading down a 10° slope (one that makes an angle of 10° with the horizontal) under the following road conditions. you may assume that the weight of the car is evenly distributed on all four tires and that the static coefficient of friction is involved—that is, the tires are not allowed to slip during the deceleration.
(a) on dry concrete m/s2
(b) on wet concrete m/s2
(c) on ice, assuming that µs = 0.100, the same as for shoes on ice m/s2

ansver
Answers: 3

Other questions on the subject: Physics

image
Physics, 22.06.2019 10:00, kanonhuffmanp3rnmy
The frequencies refer to the sample data collected from a population of interest when performing a hypothesis test comparing two or more population proportions.
Answers: 2
image
Physics, 22.06.2019 10:10, randlemccray4305
What is the angular momentum of the bar about the axle?
Answers: 3
image
Physics, 22.06.2019 19:40, xman32201
Currents in dc transmission lines can be 100 a or higher. some people are concerned that the electromagnetic fields from such lines near their homes could pose health dangers. for a line that has current 150 a and a height of 8.0 m above the ground, what magnetic field does the line produce at ground level? express your answer in teslas and as a percentage of the earth’s magnetic field, which is 0.50 g. is this value cause for worry?
Answers: 1
image
Physics, 22.06.2019 20:50, dondre54
Asquare 1m x 1m plate is shown below. all four of its edges are kept at 0 co. at t=0the temperature distribution is given by: y xtsins n75)=.a) using separation of variables determine the temperature distribution t(x, y,t)along the plate at any time t. b) discretize the heat conduction equation +=22222 txtusing a second-order centered difference scheme for the two second derivatives and a first-order forward euler scheme for the first derivative. using von neumann stability analysis, determine the stability criterion for the proposed discretization scheme in terms of , hand t. solve for the maximum allowable time step tmax
Answers: 1
You know the right answer?
This problem has been solved!
see the answer
1) stokes' law describes sedimentation of...

Questions in other subjects:

Konu
Mathematics, 10.07.2019 06:10