Two technicians are discussing a resistance measurement between the can-h and can-l wires. technician a says this measurement should be done with the ignition switch in the "run" position. technician b states that a measurement of 0 ohms indicates an open in the network. which technician is correct?

The 5-kg cylinder is initially at rest when it is placed in contact with the wall b and the rotor at a. if the rotor always maintains a constant clockwise angular velocity v = 6 rad> s, determine the initial angular acceleration of the cylinder. the coefficient of kinetic friction at the contacting surfaces b and c is mk = 0.2.

A175 g lump of molten lead at its melting point (327 c) is placed into 55.0 g of water at 20.0 c. the specific heat of lead is 130.j/kg c and the hf of lead is 20,400 j/kg. when the lead and the water have reached equilibrium, what is the temperature of the mixture?

Part f - example: finding two forces (part i) two dimensional dynamics often involves solving for two unknown quantities in two separate equations describing the total force. the block in (figure 1) has a mass m=10kg and is being pulled by a force f on a table with coefficient of static friction îľs=0.3. four forces act on it: the applied force f (directed î¸=30â above the horizontal). the force of gravity fg=mg (directly down, where g=9.8m/s2). the normal force n (directly up). the force of static friction fs (directly left, opposing any potential motion). if we want to find the size of the force necessary to just barely overcome static friction (in which case fs=îľsn), we use the condition that the sum of the forces in both directions must be 0. using some basic trigonometry, we can write this condition out for the forces in both the horizontal and vertical directions, respectively, as: fcosî¸â’îľsn=0 fsinî¸+nâ’mg=0 in order to find the magnitude of force f, we have to solve a system of two equations with both f and the normal force n unknown. use the methods we have learned to find an expression for f in terms of m, g, î¸, and îľs (no n).