The figure below is a tem micrograph showing a stacking fault in austenitic steel (fcc structure). based on the magnification used in this micrograph, compute the stacking fault energy. g 80 gpa and a 0.3 nm. 0.2um ppi

Ahot-air balloon is drifting straight downward with a constant speed of 2.40 m/s. when the balloon is 7.63 m above the ground, the balloonist decides to drop one of the ballast sandbags to the ground below. how much time elapses before the sandbag hits the ground?

Suppose that two tanks, 1 and 2, each with a large opening at the top, contain different liquids. a small hole is made in the side of each tank at the same depth 1.57 m below the liquid surface, but the hole in tank 2 has 2.49 times the cross-sectional area of the hole in tank 1. (a) what is the ratio ρ1/ρ2 of the densities of the liquids if the mass flow rate is the same for the two holes? (b) what is the ratio rv1/rv2 of the volume flow rates from the two tanks? (c) at one instant, the liquid in tank 1 is 14.9 cm above the hole. if the tanks are to have equal volume flow rates, what height above the hole must the liquid in tank 2 be just then?

Abanked road comer of radius 146 m is to be constructed. if the comer is designed for vehicles moving with a speed of 20.0 m/s, what should the banking angle be, in units of degrees?