In the diagram below the two masses hanging over the pulley have values ma 35 kg and mb 38 kg. the (frictionless) pulley is a uniform cylinder or radius ro 0.381m and mass 3.1 kg. initially ma is on the ground while ma is 2.5m above the ground. if the system is released, determine the speed of ma just before it strikes the ground.

Steam is generated in a boiler of a cogeneration plant at 10 mpa and 450°c at a steady rate of 5 kg/s. in normal operation, steam expands in a turbine to a pressure of 0.5 mpa and is then routed to the process heater, where it supplies the process heat. steam leaves the process heater as a saturated liquid and is pumped to the boiler pressure. in this mode, no steam passes through a condenser, which operates at 20 kpa. (a) determine the power produced in the turbine and the rate at which process heat is supplied in this mode. (b) determine the power produced in the turbine and the rate of process heat supplied if only 60 percent of the steam is routed to the process heater and the remainder is expanded to the condenser pressure. (3.32 mw; 9.69 mw; 4.25 mw; 5.82 mw)