Nitrogen (n2) initially at 40°f and 14.7 lbf/in.2 fills a closed, rigid, 6.5-ft3 tank fitted with a paddle wheel. during a process, the paddle wheel provides 5 btu of energy transfer by work to the gas. the gas temperature reaches 80°f at the end of the process. assuming ideal gas behavior, determine the mass of nitrogen, in lb, and the heat transfer, in btu. kinetic and potential energy effects can be ignored.

a solenoid is created by wrapping a l = 90 m long wire around a hollow tube of diameter d = 4.5 cm.   the wire diameter is d = 0.9 mm.   the solenoid wire is then connected to a power supply so that a current of i = 9 a flows through the wire.

randomized variablesl = 90 m

d = 4.5 cm

d = 0.9 mm

i = 9 a                                          

write an expression for the number of turns, n, in the solenoid. you do not need to take into account the diameter of the wire in this calculation.

calculate the number of turns, n, in the solenoid.

write an expression for the length of the solenoid (l2) in terms of the diameter of the hollow tube d.

calculate the length of the solenoid (l2)   in meters.

calculate the magnitude of the magnetic field at the center of the solenoid in teslas.

explanation:

the answer is ampere

the ampere is used to measure electricity. an ampere is a unit of electric current equal. a unit of measure for the flow of current in a circuit. one ampere is the amount of current flow provided when one volt of electrical pressure is applied against one ohm of resistance.

answer///terminator or twilight zone;