subject
Physics, 05.07.2019 02:20 toricepeda82

What is the total energy needed to raise this system to 100 °c? ns m .88 wentga
a 999 watt heater is then applied to the steel sphere. assume all parts of the system gain energy at an equal rate
what is the temperature of the air and steel when the water reaches 100 c? a 8 - if the pressure of the air in the sphere is always 1 atm, what is the mass transfer rate of the air over the time it takes to heat the water to 100 °c? is it gaining or losing mass? mco) rono todoq bin denil wd
the heater is shut off and the system reaches an equilibrium temperature. what is this temperature? uis ods sw stu tstwa s atot bo s la ad banaolaxatom 000.0ed alverods ule odt aice bloow zognile ot wosto abaateowlotianoil ecie igs lanit sule ads to y od od ei jedw iqe w. sr nty if the system is allowed to cool what is the initial rate at which it would cool back down to stp? assume the surface area of the sphere is around 0.138 m2 and the air thickness that surrounds the sphere is 2.22 cm.

ansver
Answers: 2

Other questions on the subject: Physics

image
Physics, 21.06.2019 23:00, hunterdylan01
Acoal-fired plant generates 600 mw of electric power. the plant uses 4.8 x 10^6 kg of coal each day, and the heat of combustion of coal is 3.3x 10^7 j/kg. the steam that drives the turbines is at a temperature of 300° c, and the exhaust water is at 37° c. (a) what is the overall efficiency of the plant for generating electric power? (b) how much thermal energy is exhausted each day? (c) what is the change in entropy of the universe for this heat engine? (d) using the same heat reservoirs, what is the maximum possible (carnot) efficiency for a heat engine?
Answers: 1
image
Physics, 22.06.2019 04:40, ortega103
Steam enters an adiabatic diffuser at 150 kpa and 1208c with a velocity of 550 m/s. determine the minimum velocity that the steam can have at the outlet when the outlet pressure is 300 kpa.
Answers: 3
image
Physics, 22.06.2019 15:00, gabflips7267
What kind of simple machine is a catapult?
Answers: 1
image
Physics, 22.06.2019 15:50, micahsocool23
The space between two 15-in.-long concentric cylinders is filled with glycerin (viscosity = 8.5 × 10-3 lb·s/ft2). the inner cylinder has a radius of 1 in. and the gap width between cylinders is 0.1 in. determine (a) the torque and (b) the power required to rotate the inner cylinder at 180 rev/min. the outer cylinder is fixed. assume the velocity distribution in the gap to be linear.
Answers: 2
You know the right answer?
What is the total energy needed to raise this system to 100 °c? ns m .88 wentga
a 999 watt h...

Questions in other subjects:

Konu
Mathematics, 29.05.2020 20:57
Konu
Biology, 29.05.2020 20:57