subject
Physics, 01.07.2019 17:10 sofielofi

In a young's double-slit experiment, a thin sheet of mica is placed over one of the two slits. as a result, the center of the fringe pattern (on the screen) shifts so that the center is now occupied by what was the30th dark band. the wavelength of the light in this experiment is 480 nm and the index of the mica is 1.60. the mica thickness is:

ansver
Answers: 3

Other questions on the subject: Physics

image
Physics, 21.06.2019 19:30, sariyamcgregor66321
Molten iron fills a mould, which has a volume of 200 cm cubed. calculate the volume when the iron cools and solidifies. molten iron has a density of 7.0g/cm cubed. in its solid state, iron has a density of 8.0g/cm cubed.
Answers: 3
image
Physics, 22.06.2019 01:10, joejoefofana
Suppose that two tanks, 1 and 2, each with a large opening at the top, contain different liquids. a small hole is made in the side of each tank at the same depth 1.57 m below the liquid surface, but the hole in tank 2 has 2.49 times the cross-sectional area of the hole in tank 1. (a) what is the ratio ρ1/ρ2 of the densities of the liquids if the mass flow rate is the same for the two holes? (b) what is the ratio rv1/rv2 of the volume flow rates from the two tanks? (c) at one instant, the liquid in tank 1 is 14.9 cm above the hole. if the tanks are to have equal volume flow rates, what height above the hole must the liquid in tank 2 be just then?
Answers: 3
image
Physics, 22.06.2019 11:30, georgesarkes12
1. a camcorder has a power rating of 19 watts. if the output voltage from its battery is 7 volts, what current does it use?answer units 2. a 1.5m wire carries a 6 a current when a potential difference of 57 v is applied. what is the resistance of the wire? your
Answers: 2
image
Physics, 22.06.2019 23:40, Demondevilg
Along wire of diameter 1 mm is submerged in an oil bath of temperature ∞ 31°c. the wire has an electrical resistance per unit length of 0.01 ω/m. if a current of 103 a flows through the wire and the convection coefficient is 500 w/m2·k, what is the steady-state temperature of the wire? from the time the current is applied, how long does it take for the wire to reach a temperature that is within 1°c of the steady-state value? the properties of the wire are 8000 kg/m3, 500 j/kg·k, and 20 w/m·k.
Answers: 3
You know the right answer?
In a young's double-slit experiment, a thin sheet of mica is placed over one of the two slits. as a...

Questions in other subjects:

Konu
History, 14.04.2020 01:53
Konu
Biology, 14.04.2020 01:54