Physics, 27.06.2019 04:20 Ltksls4177

You're writing the instruction manual for a power saw, and you have to specify the maximum permissible length for an extension cord made from 18-gauge copper wire (diameter 1.0 mm).
the saw draws 9 a and needs a minimum of 115 v across its motor when the outlet supply is 120v.
what do you specify for the maximum length extension cord, given that they come in 25-foot increments?
express your answer to 2 significant figures

Answers: 2

Show answers

Other questions on the subject: Physics

Physics, 22.06.2019 09:40, wi8wuwj283jendjdudjd

When you jump from an elevated position you usually bend your knees upon reaching the ground. by doing this, you make the time of the impact about 10 times as great as for a stiff-legged landing. in this way the average force your body experiences is a) less than 1/10 as great. b) more than 1/10 as great. c) about 1/10 as great. d) about 10 times as great.

Answers: 1

continue

Physics, 22.06.2019 12:10, JN02

Ablock having mass m slides down an inclined plane. the force of friction between the block and the inclined plane is f, the block's weight is m g, and the normal force is n. (a) draw a free – body force diagram showing the forces acting on the block. (b) write down all relevant newton’s equations for a given situation.

Answers: 1

continue

Physics, 22.06.2019 13:10, alejandramirand9836

A0.750 kg aluminum pan is removed from the stove and plunged into a sink filled with 10.0 kg of water at 293 k. the water temperature quickly rises to 297 k. what was the initial temperature of the aluminum pan? the specific heat of aluminum is ca = 900 j/(kgk) and water is cw = 4190 j/(kgk)

Answers: 3

continue

Physics, 23.06.2019 02:30, gilbert325

Ajet plane flying 600 m/s experience an acceleration of 4.0 g when pulling out of a circular dive. what is the radius of curvature part of the path in which the plane is flying? a) 7100 m b) 650 m c) 9200 m d) 1200 m

Answers: 3

continue

You know the right answer?

You're writing the instruction manual for a power saw, and you have to specify the maximum permissib...