subject
Physics, 25.06.2019 01:00 simonthang8

Asolar cell has an open circuit voltage value of 0.60 v with a reverse saturation current density of jo = 3.9 × 10−9 a/m2 . the temperature of the cell is 27◦c, the cell voltage is 0.52 v, and the cell area is 28 m2 . if the solar irradiation is 485 w/m2 , determine the power output and the efficiency of the solar cell.

ansver
Answers: 1

Other questions on the subject: Physics

image
Physics, 22.06.2019 02:00, honeybaby675610
Askydiver weighing 140 lb (including equipment) falls vertically downward from an altitude of 19,000 ft and opens the parachute after 18 s of free fall. assume that the force of air resistance, which is directed opposite to the velocity, is of magnitude 0.55|v| when the parachute is closed and is of magnitude 14|v| when the parachute is open, where the velocity v is measured in ft/s. assume that acceleration due to gravity has magnitude 32 ft/s/s; remember that weight is the product of mass and gravitational acceleration. (a) find the speed of the skydiver when the parachute opens. (b) find the distance fallen before the parachute opens. (c) what is the limiting velocity vl after the parachute opens? (d) determine how long the sky diver is in the air after the parachute opens. (e) plot the graph of velocity versus time from the beginning of the fall until the skydiver reaches the ground.
Answers: 1
image
Physics, 22.06.2019 08:00, jbot9050
You have a pick-up truck that weighed 4,000 pounds when it was new. you are modifying it to increase its ground clearance. when you are finished
Answers: 1
image
Physics, 22.06.2019 14:40, akitchen10
A5 foot by 5 foot box culvert is buried 6 feet beneath the surface of the ground. a crosssection of this very long culvert (into and out of the page) is illustrated below. assume that the soil in which the culvert is buried has the following properties: jt = 120 pcf, w = 12%, ko = 0.50, ka = 0.33, and kp = 3.00. calculate the total horizontal force per unit length of culvert (fh) felt on one of the vertical faces of the culvert.
Answers: 1
image
Physics, 22.06.2019 15:00, Fetty1738
What pressure difference is required between the ends of a 2.0-m-long, 1.0-mm-diameter horizontal tube for 40 c water to flow through it at an average speed of 4.0 m/s?
Answers: 1
You know the right answer?
Asolar cell has an open circuit voltage value of 0.60 v with a reverse saturation current density of...

Questions in other subjects: