subject
Physics, 25.06.2019 18:10 esmeraldatoral0112

Two cars collide with each other. before the collision, one car (m = 1100 kg) is going north at 18 m/s and the other car (m = 1300 kg) is going south at 16 m/s. what is the momentum of the system made up of the two cars after the collision?

ansver
Answers: 2

Other questions on the subject: Physics

image
Physics, 21.06.2019 16:10, andrewisboss59
Amachine, modeled as a simple spring-mass system, oscillates in simple harmonic motion. its acceleration is measured to have an amplitude of 5,000 mm/s with a fre- quency of 10 hz. compute the maximum displacement the machine undergoes during this oscillation.
Answers: 1
image
Physics, 22.06.2019 06:20, jonmorton159
Clothing made of several thin layers of fabric with trapped air in between, often called ski clothing, is commonly used in cold climates because it is light, fashionable, and a very effective thermal insulator. so it is no surprise that such clothing has largely replaced thickand heavy old-fashioned coats. (a) consider a jacket made of five layers of 0.1-mm-thick synthetic fabric (k = 0.13 w/m·°c) with 1.5-mm-thick air space (k = 0.026 w/m·°c) between the layers. assuming the inner surface temperature of the jacket to be 28°c and the surface area to be 1.25 m2, determine the rate of heat loss through the jacket when the temperature of the outdoors is 0°c and the heat transfer coefficient at the outer surface is 25 w/m2·°c. (b) what would your response be if the jacket is made of a single layer of 0.5-mm-thick synthetic fabric? what should be the thickness of a wool fabric (k = 0.035 w/m·°c) if the person is to achieve the same level of thermal comfort wearing a thick wool coat instead of a five-layer ski jacket?
Answers: 1
image
Physics, 23.06.2019 03:50, gaby8282
For most stars, what does a higher temperature tend to to with? a lower luminosity a higher luminositya red color none of the above
Answers: 1
image
Physics, 23.06.2019 08:30, lele2010
Industrial processes often require the damping of vibrations. consider a workbench that uses four large ideal springs in place of traditional legs, with each spring supporting one corner of the workbench and exhibiting a force constant of 47500 n/m. this workbench is used when creating products that involve highly unstable chemicals. according to specifications, the acceleration of the manufacturing equipment must be held to less than 22.3 m/s2 for the manufacturing process to proceed safely. the amplitude of vibrations are expected to remain under 0.622 mm throughout. given that the workbench and maufacturing equipment combine to 6.05 kg, find the maximum acceleration expected of the equipment and workbench. (ignore the mass of the springs.)
Answers: 2
You know the right answer?
Two cars collide with each other. before the collision, one car (m = 1100 kg) is going north at 18 m...

Questions in other subjects:

Konu
English, 15.09.2020 01:01
Konu
Geography, 15.09.2020 01:01
Konu
Spanish, 15.09.2020 01:01
Konu
Mathematics, 15.09.2020 01:01
Konu
Mathematics, 15.09.2020 01:01
Konu
Mathematics, 15.09.2020 01:01
Konu
Mathematics, 15.09.2020 01:01
Konu
Mathematics, 15.09.2020 01:01
Konu
Mathematics, 15.09.2020 01:01
Konu
Mathematics, 15.09.2020 01:01