Physics, 25.10.2019 15:43 ashleyrover11

Which statement describes nuclear fission

Answers: 1

Show answers

Other questions on the subject: Physics

Physics, 22.06.2019 01:30, romanlittlewood

For problems 1-3, consider a simple dc brush motor with a permanent magnet stator. with an an consider a simple dc brush motor with a permanent magnet ae supply voltage of 100 v, the no-load speed of the motor is 1000 rpm. this motor can provide a torque of 1.9 n-m at 800 rpm drawing a current of 2 a current are both zero at no load.) 1. with an armature supply voltage of 100 v, the motor is operated at 900 rpm. what is the motor torque? what is the mechanical power delivered by the motor? what is the current draw? what is the electrical power input? what is the energy efficiency of the motor? with an armature supply voltage of 100 v, the motor is operated at 1100 rpm (where it acts as a generator). what torque input is required? what mechanical power is required what current is generated? what is the electrical power generated? what is the energy efficiency of the motor acting as a generator? 2. with an armature supply voltage raised to 120 v, the motor is operated at 1000 rpm. what is the no-load speed? what is the motor torque? what is the mechanical power delivered by the motor? what is the current draw? what is the electrical power input what is the energy efficiency of the motor? 3.

Answers: 3

continue

Physics, 22.06.2019 03:00, alexanderavrett

Standing side by side ,you and a friend step off a bridge at different times and fall for 1.6s to the water below. your friend goes first, and you follow after he has dropped a distance of 2.0m. when your friend hits the water, is the seperation between the two of you 2.0m or more than 2.0m? verify your answer with a calculation.

Answers: 2

continue

Physics, 22.06.2019 04:00, louiecampos

Determine the maximum r-value of the polar equation r =3+3 cos 0

Answers: 1

continue

Physics, 22.06.2019 06:00, jagmeetcheema

The frequency of vibrations of a vibrating violin string is given by f = 1 2l t ρ where l is the length of the string, t is its tension, and ρ is its linear density.† (a) find the rate of change of the frequency with respect to the following. (i) the length (when t and ρ are constant) (ii) the tension (when l and ρ are constant) (iii) the linear density (when l and t are constant) (b) the pitch of a note (how high or low the note sounds) is determined by the frequency f. (the higher the frequency, the higher the pitch.) use the signs of the derivatives in part (a) to determine what happens to the pitch of a note for the following. (i) when the effective length of a string is decreased by placing a finger on the string so a shorter portion of the string vibrates df dl 0 and l is ⇒ f is ⇒ (ii) when the tension is increased by turning a tuning peg df dt 0 and t is ⇒ f is ⇒ (iii) when the linear density is increased by switching to another string df dρ 0 and ρ is ⇒ f is ⇒

Answers: 3

continue

You know the right answer?

Which statement describes nuclear fission
...