Physics, 15.10.2019 18:00 fanofhope31

How much power is required to do 40 j of work on an object in 5 seconds?
a. 0 w
b. 5 w
c. 8 w
d. 40 w
e. 200 w

Answers: 1

Show answers

Other questions on the subject: Physics

Physics, 22.06.2019 05:50, charlesrogers38

There are two routes similar in terrain; however, one route has an incline of approximately 28 degrees, and you must decide on which route to take. what is the maximum road grade that your fully loaded ecv can climb?

Answers: 2

continue

Physics, 22.06.2019 06:00, 10033636

Which of the following changes will result in a stronger electromagnet? a. using fewer coils of wire b. using a higher voltage c. using a shorter nail d. using a longer wire

Answers: 1

continue

Physics, 22.06.2019 10:50, afonseca73

Asheet of steel 1.5 mm thick has nitrogen atmospheres on both sides at 1200oc and is permitted to achieve a steady-state diffusion condition. the diffusion coefficient for nitrogen in steel at this temperature is 6 x 10- 11 m2 /s, and the diffusion flux is found to be 1.2 x 10-7 kg/m2 -s. also, it is known that the concentration of nitrogen in the steel at the high-pressure surface is 4 kg/m3 . how far into the sheet from this high-pressure side will the concentration be 2.0 kg/m3 ? assume a linear concentration profile.

Answers: 3

continue

Physics, 22.06.2019 16:20, jmackenzie7

How does a circuit breaker protect a refrigerator? a. when the current is too high, a metal strip in the fuse melts and opens the circuit. b. when the resistance is too high , a re-settable which opens a circuit c. when the current is too high , a re-settable switch opens the circuit d. when the resistance is too high a metal strip in the fuse melts and opens the circuit

Answers: 2

continue

You know the right answer?

How much power is required to do 40 j of work on an object in 5 seconds?
a. 0 w
b. 5 w...