subject
Physics, 21.06.2019 19:00 paytonxxburns05

Many machines- including inclined planes such as ramps- increase the strength of the force put into the machine but decrease the distance over which the force is applied.

ansver
Answers: 1

Other questions on the subject: Physics

image
Physics, 21.06.2019 20:00, berankworthy7153
Experiment scenario 2: a biology student wants to conduct a study of how the amount of food affects the weight gain for mice. i have set up four cages with a mouse in each cage. fill in the boxes that would allow the biology student to complete the study correctly
Answers: 1
image
Physics, 21.06.2019 22:00, Angelo1660
Air is held within a frictionless piston-cylinder container, which is oriented vertically. the mass of the piston is 0.45 kg and the cross-sectional area is 0.0030 m2. initially (state 1) the pressure of the gas is sufficient to support the weight of the piston as well as the force exerted by the atmospheric pressure ( 101.32 kpa). the volume occupied by the air within the cylinder in state 1 is 1.00 liter. one end of a spring (with spring constant k = 1000 n/m) is attached to the top of the piston, while the other end of the spring is attached to a stage that can move vertically. initially the spring is undeflected and therefore exerts no force. then the stage is then moved quasistatically downward a distance of 10.0 cm, at which point the system reaches state 2. the piston-cylinder is not insulated; rather it remains in diathermal contact with the surroundings, which are at a constant temperature of 300 k. what is the change of pressure within the container?
Answers: 3
image
Physics, 22.06.2019 02:50, antcobra
20. threshold braking in the vehicle's braking system occurs when a. the brake pedal is pushed, heel on floorboard, with full foot pressure. b. the brakes are exerting full braking power, without traction loss. c. the driver begins pushing down the brake pedal, with moderate slowdown. d. the brakes just begin to take hold with a gradual slowdown.
Answers: 3
image
Physics, 22.06.2019 06:20, lolweapon
Atwo-stage air compressor operates at steady state, compression 10m^3/min of air from 100 kpa and 300k to 1200 kpa. an intercooler between the two stages cools the air to 300k at a constant pressure of 350 kpa. the compression processes are isentropic. a) calculate the power required to run the compressor, in kw b) compare the result to the power required for isentropic compression from the same inlet state to the same final pressure.
Answers: 1
You know the right answer?
Many machines- including inclined planes such as ramps- increase the strength of the force put into...

Questions in other subjects:

Konu
Mathematics, 16.10.2020 15:01
Konu
Engineering, 16.10.2020 15:01
Konu
Mathematics, 16.10.2020 15:01