subject
Physics, 26.06.2019 21:30 cshopholic4921

Bis force of or the force with which the block pushes back against the force pushing upon it

ansver
Answers: 1

Other questions on the subject: Physics

image
Physics, 21.06.2019 21:30, alexandraparava
In what direction does the medium move relative to the direction of the wave? explain.
Answers: 3
image
Physics, 22.06.2019 01:00, Bearboy1564
Asuppose a suitcase has a mass of (m) 30 kg and a net force (n) of 10 kg*m/s. what is the acceleration rate of the suitcasein m/s? show your work to support your answer.
Answers: 3
image
Physics, 22.06.2019 03:00, ambercuevas2707
An internally reversible refrigerator has a modified coefficient of performance accounting for realistic heat transfer processes of where qin is the refrigerator cooling rate, qout is the heat rejection rate, and is the power input. show that copm can be expressed in terms of the reservoir temperatures tc and th, the cold and hot thermal resistances rt, c and rt, h, and qin, as where rtot rt, c rt, h. also, show that the power input may be expressed as 1.39 a household refrigerator operates with cold- and hot-temperature reservoirs of tc 5 c and th 25 c, respectively. when new, the cold and hot side resistances are rc, n 0.05 k/w and rh, n 0.04 k/w, respectively. over time, dust accumulates on the refrigerator’s condenser coil, which is located behind the refrigerator, increasing the hot side resistance to rh, d 0.1 k/w. it is desired to have a refrigerator cooling rate of qin 750 w. using the results of problem 1.38, determine the modified coefficient of performance and the required power input w under (a) clean and (b) dusty coil conditions. internally reversible refrigerator qout qin w high-temperature reservoir low-temperature reservoir th th, i tc, i tc high-temperature side resistance low-temperature side resistance w qin th tc qinrtot tc qinrtot copm tc qinrtot th tc
Answers: 2
image
Physics, 22.06.2019 05:10, zionnahl
Total solidification times of three casting geometries are to be compared: a sphere, a cylinder, in which the length-to-diameter ration - 1.0, and a cube. volume = 1000 cm^3 for all three shhapes, and the same casting alloy is used. a) determine the solidification times of each geometry b) based on the results of part (a), which geometric element would make the best riser? c) if the mold constant = 3.5 min/cm^2 in chvorinov's rule, compute the total solidification time for each casting.
Answers: 3
You know the right answer?
Bis force of or the force with which the block pushes back against the force pushing upon it...

Questions in other subjects:

Konu
History, 22.07.2021 17:50
Konu
English, 22.07.2021 17:50