subject
Physics, 27.06.2019 19:30 jojoangelique13

What is the amplitude of the wave shown in the diagram?


What is the amplitude of the wave shown in the diagram?

ansver
Answers: 1

Other questions on the subject: Physics

image
Physics, 22.06.2019 01:10, joejoefofana
Suppose that two tanks, 1 and 2, each with a large opening at the top, contain different liquids. a small hole is made in the side of each tank at the same depth 1.57 m below the liquid surface, but the hole in tank 2 has 2.49 times the cross-sectional area of the hole in tank 1. (a) what is the ratio ρ1/ρ2 of the densities of the liquids if the mass flow rate is the same for the two holes? (b) what is the ratio rv1/rv2 of the volume flow rates from the two tanks? (c) at one instant, the liquid in tank 1 is 14.9 cm above the hole. if the tanks are to have equal volume flow rates, what height above the hole must the liquid in tank 2 be just then?
Answers: 3
image
Physics, 22.06.2019 19:30, QueenNerdy889
Refrigerant-134a flows through a carnot heat pump cycle at 0.5 kg/s. it is known that the maximum absolute temperature in the cycle is 1.1 times the minimum absolute temperature, and the net power input to the cycle is 2.5 kw. if the refrigerant changes from a saturated vapor to a saturated liquid during the heat rejection process, determine the maximum magnitude of the enthalpy of vaporization for this process in kj/kg (with 3 significant figures).
Answers: 3
image
Physics, 22.06.2019 22:40, hectorav6619
Is a copper wire a conductor or insulator?
Answers: 2
image
Physics, 23.06.2019 06:30, acharity196
Acopper sheet has a volume of 100 cm³. if the density of copper is 8.9 g/cm³, what is the mass of the sheet? a. 11 g b. 8.9 g c. 189 g d. 890 g
Answers: 1
You know the right answer?
What is the amplitude of the wave shown in the diagram?
...

Questions in other subjects: