Mars was once similar to earth in that
a. it had only one moon.
b. liquid water flowed on its surface.
c. it showed evidence of plate tectonics.
d. its atmosphere had a thin layer of carbon dioxide.

Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)

Arunner is training for an upcoming marathon by running around a 100-m-diameter circular track at constant speed. let a coordinate system have its origin at the center of the circle with the x-axis pointing east and the y-axis north. the runner starts at (x, y) = (50 m, 0 m) and runs 2.5 times around the track in a clockwise direction.

Which component is used to measure the current in a circuit? oa. switch ob. resistor oc. ammeter the answer is c. for y’all plato people