You are making a 568b utp crossover cable that will be used to cascade two switches on an ethernet network. you have attached an rj-45 connector to one end of the cable and inserted the white with orange stripe wire into pin 1 of the connector. the orange wire has been inserted into pin 2 of the connector. which wire should be inserted into pin 1 of the rj-45 connector on the other end of the cable?

For a 568B crossover cable that already has wht-org and org on pins 1 and 2 of the connector at one end, the connector at the OTHER end should have wht-grn and grn on pins 1 and 2 respectively.

The wht-org and org at that end should drop to pins 3 and 6 respectively.

You're welcome, and good luck.

the answer would be c. motion and direction

i hope this : )

jupiter is the largest planet in our solar system, having a mass and radius that are respectively, 318 and 11.2 times that of earth. suppose that an object falls from rest near the surface of each planet and that the acceleration due to gravity remains constant during the fall. each object falls the same distance before striking the ground. determine the ratio of the time of fall on jupiter to that on earth.