Physics, 16.07.2019 17:30 JorgeW5St

(a) when rebuilding her car's engine, a physics major must exert 300 n of force to insert a dry steel piston into a steel cylinder. what is the magnitude of the normal force between the piston and cylinder? (b) what is the magnitude of the force would she have to exert if the steel parts were oiled?

Answers: 1

Show answers

Answers

Answer from: mraymundo025p0gpw9

A) The magnitude of the normal force between the piston and cylinder is : 1000 N

B) The magnitude of the force exerted when parts are oiled = 10000 N

Given data :

Force exerted by physics major = 300 n

coefficient of friction of dry steel cylinder ( μ ) = 0.3 ( found online )

coefficient of friction with oil in between ( μ ) = 0.03 ( found online )

A) Determine the magnitude of normal force

Force applied ( Fa ) = frictional force ( μ N )

therefore :

N = Fa / μ

where μ = 0.3

magnitude of normal force ( N ) = 300 / 0.3

= 1000 N

B) Determine the magnitude of force when oil is applied

N = Fa / μ

= 300 / 0.03

= 10000 N

Hence we can conclude that The magnitude of the normal force between the piston and cylinder is : 1000 N and The magnitude of the force exerted when parts are oiled = 10000 N

Learn more about magnitude of force : link

Answer from: zoeycrew

There are some missing data in the text of the problem. I've found them online:
a) coefficient of friction dry steel piston - steel cilinder: 0.3
b) coefficient of friction with oil in between the surfaces: 0.03

Solution:
a) The force F applied by the person (300 N) must be at least equal to the frictional force, given by:
$F_f = \mu N$
where $\mu$ is the coefficient of friction, while N is the normal force. So we have:
$F=\mu N$
since we know that F=300 N and $\mu=0.3$ , we can find N, the magnitude of the normal force:
$N= \frac{F}{\mu}= \frac{300 N}{0.3}=1000 N$

b) The problem is identical to that of the first part; however, this time the coefficienct of friction is $\mu=0.03$ due to the presence of the oil. Therefore, we have:
$N= \frac{F}{\mu}= \frac{300 N}{0.03}=10000 N$

Answer from: Quest

absorption lines are where light has been absorbed by the atom thus you see a dip in the spectrum whereas.

emission spectra have spikes in the spectra due to atoms releasing photons at those wavelengths.

explanation:

Answer from: Quest

like poles repel so keep pushing north to north and repels funny to see this

Other questions on the subject: Physics

Physics, 21.06.2019 18:40, lilblackbird4

What are the phases shown in a and d called?

Answers: 1

continue

Physics, 22.06.2019 01:10, atirahmalik2425

If vx = 7.00 units and vy = -7.60 units, determine the magnitude of v⃗ . determine the direction of v⃗ .

Answers: 2

continue

Physics, 22.06.2019 07:10, ddswaggsoflyy3176

Polly is pushing a box across the floor with a force of 30 n. the force of gravity is –8 n, and the normal force is 8 n. which value could describe the force of friction if polly could not move the box?

Answers: 2

continue

Physics, 22.06.2019 10:40, rainbowboi

As you are trying to move a heavy box of mass m, you realize that it is too heavy for you to lift by yourself. there is no one around to , so you attach an ideal pulley to the box and a massless rope to the ceiling, which you wrap around the pulley. you pull up on the rope to lift the box. use g for the magnitude of the acceleration due to gravity and neglect friction forces. once you have pulled hard enough to start the box moving upward, what is the magnitude f of the upward force you must apply to the rope to start raising the box with constant velocity? express the magnitude of the force in terms of m, the mass of the box.

Answers: 1

continue

You know the right answer?

(a) when rebuilding her car's engine, a physics major must exert 300 n of force to insert a dry stee...