You are driving a vehicle that has an automatic transmission. when you park on a hill you should

Step-by-step explanation:

A number of precaution should be taken when parking an automatic transmission vehicle on a hill --

1. In automatic transmission, we should shift the car into park so that the car do not roll away because of the slope.

2. We should always apply the emergency brakes.

3. Before turning off the engine, we should turn the wheel. It will act as one more backup if the emergency brake fails. In such case, the car will roll in to or towards curb.

4. We can also put some obstacles or a block in front or at the back of the wheel depending on the inclination.

You are driving a vehicle that has an automatic transmission. when you park on a hill you should shift your transmission in park or first gear before engaging your parking brake and turning off your engine.  

Further explanation

It is crucial to know how to parking on a hill safely because there are more risks involved, such as the car’s brakes failing and the car rolls away. Just relying on your transmission and the parking brake is not enough, you should set your front-wheels against the curb to prevent the car roll on the hill by itself. This also helps you to prevent an unwanted accident. When you leave your car in neutral or drive, it will increase the risk of it rolling backward or forwards.  Then, apply your emergency brake.

Here some tips to park your car park on the hill:

1. When parking on the hill and the car's front is pointed the hill, turn the front wheels away from the curb and move back slowly until the rear portion of the car's tire slight contact with the curb. Put the transmission in park, engaging parking brake.

2. When parking on the hill and the car's front-facing downhill, turn the front wheels toward the curb then move the car forward until the front tire slightly touches the cur, engage park, engage the parking brake and turn off the engine.  

Parking downhill - automatic transmission

Brake failure

Keywords: automatic cars, automatic transmission, park car on a hill, beginner driver

14 ft 7 inches

step-by-step explanation:

since each model inch corresponds to 25 real inches, 7 model inches will correspond to

7×25" = 175"

at 12" per foot, that is 14 feet, 7 inches.

p ÷ r = tan(x)

step-by-step explanation:

given that there is a figure below shows a right triangle: a right triangle is shown with hypotenuse equal to q units and the length of the legs equal to p units and r units.

graph is missing so i will create the graph as per given information.

the angle between the legs having lengths p units and q units is y degrees. the angle between the legs having lengths r units and q units is x degrees.

now we need to find about what is p ÷ r equal to.

so we can use trigonometric ratio tan(x)=[altitude]/[base] to find the value of p ÷ r, because p is the altitude and r is the base.

p ÷ r=tan(x)

hence final answer is p ÷ r=tan(x).