The terminal point of 0 is (1/2, sqrt3/2). what is cos 0? a. sqrt3/3 b. 1/2 c. sqrt3 d. sqrt3/2

which expression can be used to convert 80 us dollars (usd) to australian dollars (aud)?

1 usd = 1.0343 aud

1 aud = 0.9668 usd

step-by-step explanation:

sorry just need the points

step-by-step explanation:

12: 00 p.m. to 7: 00 p.m. is a total of 7 hours.

4: 00 p.m. to 7: 00 p.m. is a total of 3 hours.

this means that from 4: 00 p.m to 7: 00 p.m. this represents 3/7 of what was lost from 12: 00 p.m. to 7: 00 p.m.

after knowing this, after doing 11,600 - 6,800 = 4,800

4,800 represents 3/7 of what was lost for 7 hours.

we then divide 4,800 by 3 which gets 1,600.

because we know that 1,600 represents 1/7 of how much water was lost, we just have to multiply by 7, which gets 11,200.   after adding 11,200 to how much water was left at 7: 00 p.m. which was 6,800. 11,200 + 6,800 = 18,000

this means that the pool originally had 18,000 gallons in the pool.

you can also check your work by doing 18,000 - 4(1600), which becomes           1800 - 6400 which gets you 11,600.

part a

answer: a reasonable domain is where n is a real number. so n can be between 0 and 10. both endpoints are included.

work shown:

n is the number of days after the experiment starts. the smallest n can be is n = 0 which means that 0 days have gone by, and we're at the start. to find out how large n should be, then replace f(n) with 16.13 and solve for n. use logarithms to isolate the exponent.

f(n) = 12*(1.03)^n

16.13 = 12*(1.03)^n

16.13/12 = (1.03)^n

1.34416666666667 = (1.03)^n

(1.03)^n = 1.34416666666667

log[ (1.03)^n ] = log[ 1.34416666666667 ]

n*log[ 1.03 ] = log[ 1.34416666666667 ]

n = log[ 1.34416666666667 ]/log[ 1.03 ]

n = 10.0062999823929

this rounds to n = 10 which is fairly close but not 100% perfect. so this is the largest n can be.

note: if you plug n = 10 into f(n), you'll get roughly 16.127 which rounds to 16.13 (this comes up again in part c)

=====================================

part b

answer: the y intercept is 12. it represents the starting height of the plant in cm.

work shown:

plug n = 0 into the f(n) function. simplify

f(n) = 12*(1.03)^n

f(0) = 12*(1.03)^0

f(0) = 12*(1)

f(0) = 12

on day n = 0, aka the starting point, the height f(n) is 12 cm

=====================================

part c

answer: the average rate of change is approximately 0.43061036458991 (round however you need to). this represents the average growth rate from day n = 3 to day n = 10. so the plant grew roughly 0.43 cm per day during this timespan, assuming you round to 2 decimal places.

work shown:

compute f(3)

f(n) = 12*(1.03)^n

f(3) = 12*(1.03)^3

f(3) = 13.112724 < we'll use this later

compute f(10)

f(n) = 12*(1.03)^n

f(10) = 12*(1.03)^10

f(10) = 16.1269965521294 < we'll use this later

now use the formula below with a = 3 and b = 10

aroc = average rate of change

aroc = [ f(b) - f(a) ]/[ b - a ]

aroc = [ f(10) - f(3) ]/[ 10 - 3 ]

aroc = (16.1269965521294 - 13.112724)/(10 - 3)

aroc = 3.0142725521294/7

aroc = 0.43061036458991

round this however you need to

note: the plant grew approximately 3.01 cm over 7 days, so roughly 0.43 cm per day is the average growth rate (if you were to round to 2 decimal places).