How to find root hair

I'll proceed by evaluating total length and surface area by scanned images. For measurements, I suggest to use winrhizo or any similar software. In this case the most important thing to think about is to use the appropiate acquisition parameters, I mean, to set a good resolution during scanning. Pixels of the aquired image should be smaller than root hairs diameter. Therefore, let me try to suggest you a good acquisition resolution. Making a quick research, it seems that hair root diameters range between 0,012 and 0,017 mm, so I suggest a resolution that will give a pixel dimension of 0,002 mm. Root hair diameters should be composed by 6-8 pixels, that is enough for winrhizo measurements. Resolution is measured in dpi, so in "dots/pixel per inch". A inch is 25,4 mm. We need pixels with a diameter of 0,002 mm, so in 25,4 mm we found 12700 pixels. That means 12700 dpi. It's a very high resolution, you need a good scanner and much space in your computer.

yes

step-by-step explanation:

always plug in x. in this case, x equals 4.

i'm going to first solve 4(2+3x)

1) 4(2+3(4)) use pemdas to solve.

i'm going to multiply whats in the parenthesis first, so 3 times 4=12.

2)4 (2+12) i'm then going to multiply 4 by both numbers in the parenthesis (because multiplying comes before adding)

4 times 2= 8.   4 times 12= 48

4) (8+48)= 56 (answer)

i'm then going to solve 8+12x and plug in 4 for x.

1) 8 +12(4)

multiplying comes before adding, so i'm gonna multiply 12 and 4.

12 times 4= 48.

2) 8+48=56

both equal the same!

Just tell koda to adjust the number of shapes himself.