Based on feedback from an independent research film, the flashlight manufacturer has decided to change the design of the flashlight. The reflector now needs to extend 4 centimeters past the center of the bulb, as shown in the diagram. In the new design, how wide will the reflector (CD) be at its widest point? Show your work.

see explanation

step-by-step explanation:

since the sequence is geometric there is a common ratio r between consecutive terms, that is

r = 4 ÷ - 2 = - 2

r = - 8 ÷ 4 = - 2

r = 16 ÷ 8 = - 2

the next term - 13 must be incorrect as it should be - 32 for the sequence to be geometric.

the first 4 terms are therefore geometric with common ratio r = - 2

a reflection across the x-axis , followed by the by a reflection across the y-axis , and then a scale dilation of 0.5 .

false

step-by-step explanation:

the reason i say this is because for a certain length of sides you can pick any two and the length is wither equal or greater than the third side and in this case it's not.

3 + 5 = 8

8 is smaller than 9 which is the third side.

hope this : )