A process produces a certain part with a mean diameter of 3 inches and a standard deviation of 0.05 inches. The lower and upper engineering specification limits are 1.80 inches and 3.05 inches. What is the Cp (measure of potential capability)

The correct answer is 4.167

Step-by-step explanation:

According to the given scenario, the calculation of the Cp i.e. measure of potential capability is as follows;

= (USL - LSL) ÷ 6 × standard deviation

= (3.05 inches - 1.80 inches) ÷ 6 × 0.05

= 1.25 ÷ 0.3

= 4.167

hence, the calculation of the Cp i.e. measure of potential capability is 4.167

the square root of what number? if you add that, then someone will probably answer the question.

the smallest possible measurement of the width is 14 feet

step-by-step explanation:

let's assume length of parallelogram is 'l'

width of parallelogram is 'w'

the perimeter of a parallelogram must be no less than 40 feet

so, we get

we are given

length of parallelogram is 6 feet

so,

l=6

we can plug it

now, we can solve for w

subtract both sides by 12

divide both sides by 2

and we get

so,

the smallest possible measurement of the width is 14 feet