Mathematics, 28.07.2020 17:01 hsjsjsjdjjd

A photoconductor film is manufactured at a nominal thickness of 25 mils. The product engineer wishes to increase the mean speed of the film and believes that this can be achieved by reducing the thickness of the film to 20 mils. Eight samples of each film thickness are manufactured in a pilot production process, and the film speed (in microjoules per square inch) is measured. For the 25-mil film, the sample data result is: Mean Standard deviation 1.15 0.11 For the 20-mil film the data yield: Mean Standard deviation 1.06 0.09 *Note: An increase in film speed would lower the value of the observation in microjoules per square inch. We may also assume the speeds of the film follow a normal distribution. Use this information to construct a 98% interval estimate for the difference in mean speed of the films. Does decreasing the thickness of the film increase the speed of the film?

Answers: 1

Show answers

Answers

Answer from: laxraAragon

A 98% confidence interval estimate for the difference in mean speed of the films is [-0.042, 0.222].

Step-by-step explanation:

We are given that Eight samples of each film thickness are manufactured in a pilot production process, and the film speed (in microjoules per square inch) is measured.

For the 25-mil film, the sample data result is: Mean Standard deviation 1.15 0.11 and For the 20-mil film the data yield: Mean Standard deviation 1.06 0.09.

Firstly, the pivotal quantity for finding the confidence interval for the difference in population mean is given by;

P.Q. = $\frac{(\bar X_1 -\bar X_2)-(\mu_1- \mu_2)}{s_p \times \sqrt{\frac{1}{n_1}+\frac{1}{n_2} } }$ ~ t__n_1_+_n_2_-_2

where, $\bar X_1$ = sample mean speed for the 25-mil film = 1.15

$\bar X_1$ = sample mean speed for the 20-mil film = 1.06

s_1 = sample standard deviation for the 25-mil film = 0.11

s_2 = sample standard deviation for the 20-mil film = 0.09

n_1 = sample of 25-mil film = 8

n_2 = sample of 20-mil film = 8

$\mu_1$ = population mean speed for the 25-mil film

$\mu_2$ = population mean speed for the 20-mil film

Also, $s_p =\sqrt{\frac{(n_1-1)s_1^{2}+ (n_2-1)s_2^{2}}{n_1+n_2-2} }$ = $\sqrt{\frac{(8-1)\times 0.11^{2}+ (8-1)\times 0.09^{2}}{8+8-2} }$ = 0.1005

Here for constructing a 98% confidence interval we have used a Two-sample t-test statistics because we don't know about population standard deviations.

So, 98% confidence interval for the difference in population means, ( $\mu_1-\mu_2$ ) is;

P(-2.624 < t_1_4 < 2.624) = 0.98 {As the critical value of t at 14 degrees of

freedom are -2.624 & 2.624 with P = 1%}

P(-2.624 < $\frac{(\bar X_1 -\bar X_2)-(\mu_1- \mu_2)}{s_p \times \sqrt{\frac{1}{n_1}+\frac{1}{n_2} } }$ < 2.624) = 0.98

P( $-2.624 \times {s_p \times \sqrt{\frac{1}{n_1}+\frac{1}{n_2} } }$ < $2.624 \times {s_p \times \sqrt{\frac{1}{n_1}+\frac{1}{n_2} } }$ < ) = 0.98

P( $(\bar X_1-\bar X_2)-2.624 \times {s_p \times \sqrt{\frac{1}{n_1}+\frac{1}{n_2} } }$ < ( $\mu_1-\mu_2$ ) < $(\bar X_1-\bar X_2)+2.624 \times {s_p \times \sqrt{\frac{1}{n_1}+\frac{1}{n_2} } }$ ) = 0.98

98% confidence interval for ( $\mu_1-\mu_2$ ) = [ $(\bar X_1-\bar X_2)-2.624 \times {s_p \times \sqrt{\frac{1}{n_1}+\frac{1}{n_2} } }$ , $(\bar X_1-\bar X_2)+2.624 \times {s_p \times \sqrt{\frac{1}{n_1}+\frac{1}{n_2} } }$ ]

= [ $(1.15-1.06)-2.624 \times {0.1005 \times \sqrt{\frac{1}{8}+\frac{1}{8} } }$ , $(1.15-1.06)+2.624 \times {0.1005 \times \sqrt{\frac{1}{8}+\frac{1}{8} } }$ ]

= [-0.042, 0.222]

Therefore, a 98% confidence interval estimate for the difference in mean speed of the films is [-0.042, 0.222].

Since the above interval contains 0; this means that decreasing the thickness of the film doesn't increase the speed of the film.

Answer from: Quest

The answer is budget i believe. hope this but it’s self explanatory.

Answer from: Quest

Ralph is earning 2.8% commission

Other questions on the subject: Mathematics

Mathematics, 21.06.2019 16:50, abbz13

Factor -8x3-2x2-12x-3 by grouping what is the resulting expression?

Answers: 2

continue

Mathematics, 21.06.2019 17:30, hp1013756

1. if we have 3 babies what is the probability they’re going to be all boys? 2. if we roll 2 die at the same time what is the probability of getting less than 10 on the first roll and a 5 on the second roll 3. if we have 3 babies what is the probability their is going to be 2 girls? 4. if we have 3 babies what is the probability of having no more than 1 girl? 5. it we have 3 babies and then have another 3 babies what is the probability of us having at least 1 boy and then having all girls?

Answers: 1

continue

Mathematics, 21.06.2019 18:40, addiemaygulley2835

Aportion of a hiking trail slopes downward at about an 84° angle. to the nearest tenth of a flot, what is the value of x, the distance the hiker traveled along the path, if he has traveled a horizontal distance of 120 feet? a. 143.3 b. 12.5 c. 120.7 d. 130.2

Answers: 1

continue

Mathematics, 21.06.2019 23:30, josecano2

Which of the following exponential functions goes through the points (1, 6) and (2, 12)? f(x) = 3(2)x f(x) = 2(3)x f(x) = 3(2)−x f(x) = 2(3)−x

Answers: 1

continue

You know the right answer?

A photoconductor film is manufactured at a nominal thickness of 25 mils. The product engineer wishes...