Atechnician is back-probing the three wires in the mass air flow (maf) sensor connector with a dmm. a poor ground is found at the maf sensor ground wire. which of the following is most likely the result of this poor ground?
a. richer air/fuel mixture
b. low maf sensor signal
c. low battery voltage
d. leaner air/fuel mixture

A Richer air/fuel mixture

i hope this helps :3

answer: i'm not going to give you the answer, but some hints to work it out.

step-by-step explanation: so, if there is a straight line that means that the line angle is 180°. so we subtract the 2 angle measures provided, (15 and 38) from 180. so the answer is 180 - (38 + 15). (you have to solve the equation)

the smallest possible measurement of the width is 14 feet

step-by-step explanation:

let's assume length of parallelogram is 'l'

width of parallelogram is 'w'

the perimeter of a parallelogram must be no less than 40 feet

so, we get

we are given

length of parallelogram is 6 feet

so,

l=6

we can plug it

now, we can solve for w

subtract both sides by 12

divide both sides by 2

and we get

so,

the smallest possible measurement of the width is 14 feet