Determine the area of a cone that its volume is 238 cubic centimeters and the height is 74 centimeters.

1.75 cm

Step-by-step explanation:

The volume of a cone is 238  with height 74. To find the radius, substitute and solve for r.

" alt="V= \frac{1}{3}\pi r^2 h\\ 238= \frac{1}{3} \pi (r^2)(74) \\ 238*3= \pi (r^2)(74)\\ \frac{714}{74\pi} = r^2\\\sqrt{\frac{714}{232.36} } =r\\ 1.75=r" />" />.

-3

step-by-step explanation:

a drawing really does here:

so i draw the horizontal line y=2 and the vertical line x=-2 at this intersection i put b (this is where my right angle is going to be).   so point b is at (-2,2).   point a is 5 units long and is also on y=2 so this point has to be (3,2) or (-7,2) -doesn't matter i will go with (3,2).

now we know c is at (-2,y) we don't know the y yet bet we know that c is on x=-2.

we have the area of the triangle is .5bh=12.5

we know the base length is 5 (ab)

we have the height is (2-y) if you look at your

plug in

.5(5)(2-y)=12.5

solve for y to get the y-coordinate for c

2.5(2-y)=12.5

divide both sides by 2.5 giving:

2-y=5

now subtract 2 on both sides

-y=3

y=-3

part a

answer: a reasonable domain is where n is a real number. so n can be between 0 and 10. both endpoints are included.

work shown:

n is the number of days after the experiment starts. the smallest n can be is n = 0 which means that 0 days have gone by, and we're at the start. to find out how large n should be, then replace f(n) with 16.13 and solve for n. use logarithms to isolate the exponent.

f(n) = 12*(1.03)^n

16.13 = 12*(1.03)^n

16.13/12 = (1.03)^n

1.34416666666667 = (1.03)^n

(1.03)^n = 1.34416666666667

log[ (1.03)^n ] = log[ 1.34416666666667 ]

n*log[ 1.03 ] = log[ 1.34416666666667 ]

n = log[ 1.34416666666667 ]/log[ 1.03 ]

n = 10.0062999823929

this rounds to n = 10 which is fairly close but not 100% perfect. so this is the largest n can be.

note: if you plug n = 10 into f(n), you'll get roughly 16.127 which rounds to 16.13 (this comes up again in part c)

=====================================

part b

answer: the y intercept is 12. it represents the starting height of the plant in cm.

work shown:

plug n = 0 into the f(n) function. simplify

f(n) = 12*(1.03)^n

f(0) = 12*(1.03)^0

f(0) = 12*(1)

f(0) = 12

on day n = 0, aka the starting point, the height f(n) is 12 cm

=====================================

part c

answer: the average rate of change is approximately 0.43061036458991 (round however you need to). this represents the average growth rate from day n = 3 to day n = 10. so the plant grew roughly 0.43 cm per day during this timespan, assuming you round to 2 decimal places.

work shown:

compute f(3)

f(n) = 12*(1.03)^n

f(3) = 12*(1.03)^3

f(3) = 13.112724 < we'll use this later

compute f(10)

f(n) = 12*(1.03)^n

f(10) = 12*(1.03)^10

f(10) = 16.1269965521294 < we'll use this later

now use the formula below with a = 3 and b = 10

aroc = average rate of change

aroc = [ f(b) - f(a) ]/[ b - a ]

aroc = [ f(10) - f(3) ]/[ 10 - 3 ]

aroc = (16.1269965521294 - 13.112724)/(10 - 3)

aroc = 3.0142725521294/7

aroc = 0.43061036458991

round this however you need to

note: the plant grew approximately 3.01 cm over 7 days, so roughly 0.43 cm per day is the average growth rate (if you were to round to 2 decimal places).