Four squares are cut from the corners from a 20 cm by 24 cm rectangular sheet of tin. the sides are then bent up to make a pan. what is the length of each side of the squares is the area of the bottom of the pan is said to be 192 cm squared

Squares are cut from the corner, so we are left with only one variable.

The area of a rectangle, the bottom of the pan, is base*height.

Let's call the sides of the removed squares "x"

so 192 = (20-x)(24-x)          foil to expand the binomials

192 = 480 - 44x - x squared         Take 192 away from both sides

0 = 288 - 44x - x squared            

0 = (36 - x)(8-x)

x = 36 and x = 8

Because 36 > 24 and 36 > 20, in this case, the squares cannot be

36cm x 36cm and therefore must be 8cm x 8cm.

Check:

(20-8)(24-8) = 192

when rotating a figure 180 degrees, imagine that you are able to take the figure and turn it clockwise or counterclockwise around a center point. to rotate a figure 180 degrees, you will need to apply the rule (x, y) → (-x, -y). start by using a coordinate grid with coordinates for each vertex of the figure. the center point of the coordinate grid is located at (0, 0), which is what you will rotate the figure around. write down the original coordinates of the shape you are going to rotate. then, apply the rule. for example, coordinate (1, 2) becomes (-1, -2). another example would be, coordinate (-4, -2) becoming (4, 2). after you change each original coordinate to the rotated coordinate, you will draw your new figure.

step-by-step explanation:

starting with:    

5 + x - 12 = 2x - 7   

5 + x - 12 - x = 2x - 7 - x (subtract x from both sides)   

5 - 12 = x - 7 (combine and cancel x's from both sides)   

5 - 12 + 7 = x - 7 + 7 (add 7 to both sides)   

0 = x (add numbers together on both sides)       

so in order for the equation to be true, x must be 0.   

trying x = -0.5   

5 + x - 12 = 2x - 7 (original equation)   

5 + -0.5 - 12 = 2(-0.5) - 7 (plug in value of x)   

5 + -0.5 - 12 = -1 - 7 (did multiplication)   

-7.5 = -8 (did addition on both sides)       

since -7.5 is obviously not equal to -8, the value of -0.5 for x is wrong.   

trying x = 0   

5 + x - 12 = 2x - 7 (original equation)   

5 + 0 - 12 = 2(0) - 7 (plug in value of x)   

5 + 0 - 12 = 0 - 7 (did multiplication)   

-7 = -7 (did addition on both sides)       

since -7 equals -7, that demonstrates that the value of 0 for x is correct.   

trying x = 1   

5 + x - 12 = 2x - 7 (original equation)   

5 + 1 - 12 = 2(1) - 7 (plug in value of x)   

5 + 1 - 12 = 2 - 7 (did multiplication)   

-6 = -5 (did addition on both sides)       

since -6 is obviously not equal to -5, the value of 1 for x is wrong.