Engineering, 14.03.2022 08:10 pineapplepizaaaaa

Question 1 of 20 : Select the best answer for the question
1. Technician A says that manually opening an exhaust gas recirculation (EGR) valve with a vacuum pump or scan tool will cause the engine to idle roughly
stall. Technician B says that blocking the EGR valve passages will have no effect on the OBD-II. Who is correct?
O A. Technician A
O B. Both Technicians A and B
O C. Technician B
OD. Neither Technician A nor B
Mark for review (Will be highlighted on the review page)
Ned Question >>
Review My Answers
Save & E
Type here to search
#
15°F Clear
A

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, breannaasmith1122

Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.

Answers: 1

continue

Engineering, 04.07.2019 18:10, settasav9641

Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.

Answers: 3

continue

Engineering, 04.07.2019 18:20, hayleymckee

Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent

Answers: 2

continue

Engineering, 04.07.2019 18:20, samueltaye

Modern high speed trains do not have perpendicular expansion gaps where rails are joined end-to-end any more they are mostly welded together but what might happen if there was a spell of particularly hot weather that causes inspection of the tracks?

Answers: 1

continue

You know the right answer?

Question 1 of 20 : Select the best answer for the question
1. Technician A says that manuall...