Engineering, 03.03.2022 03:30 alexciamartinez05

Very pure liquid water can be subcooled at atmospheric pressure to temperatures well below 0°C. Assume that 1 kg has been cooled as a liquid to −6°C. A small ice crystal (of negligible mass) is added to “seed” the subcooled liquid. If the subsequent change occurs adiabatically at atmospheric pressure, what fraction of the system freezes, and what is the final temperature? What is ΔS total for the process, and what is its irreversible feature? The latent heat of fusion of water at 0°C is 333.4 J⋅g−1, and the specific heat of subcooled liquid water is 4.226 J⋅g−1⋅°C−1. [

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, colin774

The higher the astm grain size number, the finer the gran is. a)-true b)-false

Answers: 2

continue

Engineering, 04.07.2019 18:20, myahlit84

Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false

Answers: 3

continue

Engineering, 04.07.2019 18:20, hayleymckee

Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent

Answers: 2

continue

Engineering, 04.07.2019 18:20, maustin5323

Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]

Answers: 1

continue

You know the right answer?

Very pure liquid water can be subcooled at atmospheric pressure to temperatures well below 0°C. Assu...