Engineering, 18.02.2022 07:30 thebrain1345

Why might construction crews want to install pipes before the foundation is poured? Plumbing crews are more expensive than concrete masons; therefore it is cheaper if they do their work first.
Plumbing crews are more expensive than concrete masons; therefore it is cheaper if they do their work first.

Pipes form an important component of the structural integrity of a foundation.
Pipes form an important component of the structural integrity of a foundation.

Plumbing must feed into municipal water and sewer lines buried below the foundation.
Plumbing must feed into municipal water and sewer lines buried below the foundation.

All utilities, including electrical and HVAC, are installed before the foundation is laid.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, brooklyn674

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

Answers: 3

continue

Engineering, 04.07.2019 18:20, myahlit84

Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false

Answers: 3

continue

Engineering, 04.07.2019 18:20, DroctorWellsfan

Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above

Answers: 1

continue

Engineering, 04.07.2019 19:20, mariahmimibrooks

Liquid flows at steady state at a rate of 2 lb/'s through a pump, which operates to raise the elevation of the liquid 100 ft from control volume inlet to exit. the liquid specific enthalpy at the inlet is 40.09 btu/lb and at the exit is 40.94 btub. the pump requires 3 btu/s of power to operate. if kinetic energy effects are negligible and gravitational acceleration is 32.174 tt/s, the heat transfer rate associated with this steady state process is most closely 1)-2,02 btu/s from the liquid to the surroundings 2)-3.98 btu/s from the surroundings to the liquid. 3)-4.96 btu/s from the surroundings to the liquid. 4)-1.04 btu/s from the liquid to the surroundings.

Answers: 2

continue

You know the right answer?

Why might construction crews want to install pipes before the foundation is poured? Plumbing crews...