Engineering, 16.02.2022 17:30 Redhead667
Superheated steam from the boiler is delivered to a turbine at 650 C and 8.5 MPa. The turbine exhausts at 0.01 MPa. If the turbine is 75% efficient, determine: a. The actual work of the turbine. b. The actual outlet temperature and quality (if applicable) of the exhaust from the turbine. c. If the steam exhaust is condensed (in a condenser) to a saturated liquid, what is the work required by the pump to bring the liquid to the boiler pressure (8.5 MPa)
Answers: 1
Engineering, 03.07.2019 23:20, abbz13
Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct
Answers: 3
Engineering, 04.07.2019 18:10, oshawn108
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg. k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m. k
Answers: 2
Engineering, 04.07.2019 18:20, 21megoplin
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
Superheated steam from the boiler is delivered to a turbine at 650 C and 8.5 MPa. The turbine exhaus...