Engineering, 16.02.2022 07:10 bknycfl3951
To determine the forces induced by combined axial and thermal stress loading in a statically indeterminate system. When systems are subjected to thermal loads (changes in temperature), a statically indeterminate system can be solved by combining principles of statics (equilibrium equations) with a compatibility condition. The compatibility condition describes how displacements within the system must relate based on the
Answers: 1
Engineering, 04.07.2019 19:10, jimena15
10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.
Answers: 2
Engineering, 04.07.2019 19:10, santosbeti90
With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.
Answers: 1
Engineering, 04.07.2019 19:20, GusGus11
The power source in a certain welding setup generates 3500w that is transferred to the low carbon steel work with a heat transfer factor of 0.85. the melting factor in the operation is 0.45. a continuous fillet weld is to be made with a cross-sectional area of 23 mm2 determine the travel speed at which the welding can be accomplished.
Answers: 3
To determine the forces induced by combined axial and thermal stress loading in a statically indeter...
Mathematics, 28.07.2019 02:00
Mathematics, 28.07.2019 02:00
Biology, 28.07.2019 02:00
History, 28.07.2019 02:00
Mathematics, 28.07.2019 02:00
History, 28.07.2019 02:00
History, 28.07.2019 02:00