Engineering, 05.02.2022 01:40 cbaublitz

The following measurements are taken on particularjunction diodes for which V is the terminal voltage and I isthe diode current. For each diode, estimate values of IS andthe terminal voltage at 10% of the measured current.(a) V = 0.700 V at I = 1.00 A(b) V = 0.650 V at I = 1.00 mA(c) V = 0.650 V at I = 10 μA(d) V = 0.700 V at I = 10 mA

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, cowgyrlup124

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Answers: 1

continue

Engineering, 04.07.2019 18:10, bunnles

During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false

Answers: 2

continue

Engineering, 04.07.2019 18:10, jojoangelique13

The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m

Answers: 2

continue

Engineering, 04.07.2019 18:20, kodyclancy

Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero

Answers: 2

continue

You know the right answer?

The following measurements are taken on particularjunction diodes for which V is the terminal voltag...