Engineering, 14.12.2021 03:20 Karamatullah

A surveying engineer developed a new method for measuring orthometric heights. For a sample of 1225 measurements, 935 gave a result that was within the tolerance limits. To be acceptable, the method must produce results within the tolerance limits more than 75% of the time. 1.1 The engineer would like to prove that the test is acceptable. Write the null and alternate hypotheses for this test. 1.2 The engineer finds a z calc value 1.07. At a confidence level of 95%, the tcrit value is 1.645. Should the null hypothesis be rejected at this confidence level?

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, anna22684

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.

Answers: 2

continue

Engineering, 04.07.2019 18:10, Talos02

Burgers vector is generally parallel to the dislocation line. a)-true b)-false

Answers: 2

continue

Engineering, 04.07.2019 18:20, jessie8022

Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.

Answers: 2

continue

Engineering, 04.07.2019 19:10, nbunny7208

What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces. a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.

Answers: 1

continue

You know the right answer?

A surveying engineer developed a new method for measuring orthometric heights. For a sample of 1225...