Engineering, 13.12.2021 18:40 kianajackson9828

The volume of a steady-state crystallizer is 85,000 L, and the solids fraction in the unit and the exiting stream is 0.340; that is, there are 0.340 kg of crystals per kg of slurry (the mixture of solid crystals and solution). The density of the solution is 1.15 g/mL and that of the crystals is 2.10 g/mL. The production rate of crystals from the crystallizer is 19.5 kg crystals/min. Required:

Estimate the volumetric flow rate of slurry from the crystallizer and the drawdown time of the crystallizer (the time it would take to empty the crystallizer if the feed were discontinued).

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 16:10, Arealbot

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Answers: 1

continue

Engineering, 04.07.2019 18:10, skpdancer1605

Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2

Answers: 3

continue

Engineering, 04.07.2019 18:10, bckyanne3

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Answers: 1

continue

Engineering, 04.07.2019 18:20, sarah7984

Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false

Answers: 2

continue

You know the right answer?

The volume of a steady-state crystallizer is 85,000 L, and the solids fraction in the unit and the e...