Engineering, 06.12.2021 18:20 risolatziyovudd

Consider a circular furnace that is 0.5m long and 1.0 m in diameter. The top surface (surface -1) of the furnace has an emissivity of 0.5 and a power input of 1x105 W by radiant heaters. The side walls (surface -3) consist of well-insulated refractory material, while the bottom consists of the steel plate (surface -2), which has an emissivity of 0.8. Assume diffuse, gray surface behavior for the heater and the plate and the bottom steel plate is at 350 K. Answer the following questions: (a) Compute the view factors F12 and F33
(b) Draw the radiation network for this problem
(c) By doing the energy balance for the 3 nodes, compute the radiocities (J1 and
J2) for top surface and the bottom steel plate.
(d) Compute the temperature of the top surface (T1).

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 12:10, Ryantimes2

On a average work day more than work place firs are reorted

Answers: 1

continue

Engineering, 04.07.2019 18:10, meganwintergirl

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise

Answers: 3

continue

Engineering, 04.07.2019 18:10, oshawn108

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg. k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m. k

Answers: 2

continue

Engineering, 04.07.2019 18:20, dlr1628

Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?

Answers: 2

continue

You know the right answer?

Consider a circular furnace that is 0.5m long and 1.0 m in diameter. The top surface (surface -1) of...