Engineering, 30.11.2021 21:40 juanesmania

Problem 2 (20 Pts.) An 8-bit A/D converter with a peak-to-peak voltage of 30 V is to be employed in a binary PCM
system. The input analog signal is adjusted to cover the range from -15 V to just less than 15 V,
and the converter is connected for BIPOLAR encoder. Rounding is employed in the
quantization strategy. Determine the following quantities:
(a) Normalized step size,
(b) Actual step size in volts,
(c) Normalized maximum quantized analog level,
(d) Actual maximum quantized level in volts,
(e) Normalized peak error,
(f) Actual peak error in volts.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, samanthabutryn

Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan

Answers: 3

continue

Engineering, 04.07.2019 19:20, holaadios222lol

Apiping systems consists of 6 m of 6-std type k and 12 m of 4-std type k, both drawn copper tubing. the system conveys ethylene glycol at a rate of 0.013 m3/s. the pressure drop across the system is to be calculated. there are two 90° elbows in the 6-in pipe, a reduction from the 6-in pipe to the 4-in pipe and four 90° elbows in the 4-in pipe. all fittings are soldered (same as flanged) and regular. the inlet and outlet of the system are at the same height.

Answers: 1

continue

Engineering, 04.07.2019 19:20, rosemary909

In the winter, in order to keep the classroom steadily at 68 f before 10 pm, heating with an average rate of 42,000 btu/hr is provided. assume the outdoor temperature maintains at 32°f, determine the electrical power (kw) required to (a) operate a reversible heat pump (b) operate a real heat pump with a cop (7) of 4.5 and (c) operate an electrical-resistance heater.

Answers: 3

continue

Engineering, 06.07.2019 03:10, cicimarie2018

What is the direction and how to operate the lathe?

Answers: 2

continue

You know the right answer?

Problem 2 (20 Pts.) An 8-bit A/D converter with a peak-to-peak voltage of 30 V is to be employed i...