subject
Engineering, 25.11.2021 06:40 o11011195

A barbeque grill is built from bricks which act as insulating surfaces, and it is large enough (about 2 feet in diameter) to be able to cook 25 or more hamburgers simultaneously. The rack on which the charcoal is placed is fixed on the grill, and the rack on which the burgers are placed is adjustable in height increments of 7 cm, starting at a minimum of 10 cm. When the grill is initially set up for cooking, the charcoal rack is completely covered with briquettes 2 cm in diameter. The bri- quettes are very black, and they reach a temperature of 700°C after being ignited. After the charcoal reaches its highest temperature, the hamburgers are positioned on the grill as they are removed from the refrigerator at 4 C, and their absorption coefficient can be assumed to be 0.8. The objective of this problem is to compare the performance of the grill with the meat rack placed at the closest and the third to closest settings. Assume that the rack itself does not participate in or affect the heat transfer process. Analyze the process for one 10 cm diameter hamburger placed in the middle of the grill. What is the initial rate of heat transfer to the surface of the hamburger for the two grill settings?

ansver
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, johnthienann58
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
image
Engineering, 04.07.2019 18:10, agpraga23ovv65c
Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.
Answers: 2
image
Engineering, 04.07.2019 19:10, shunna33
Plan an experiment to measure the surface tension of a liquid similar to water. if necessary, review the ncfmf video surface tension for ideas. which method would be most suitable for use in an undergraduate laboratory? what experimental precision could be expected?
Answers: 2
image
Engineering, 04.07.2019 19:10, kelseiroll9759
Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.
Answers: 1
You know the right answer?
A barbeque grill is built from bricks which act as insulating surfaces, and it is large enough (abou...

Questions in other subjects:

Konu
Computers and Technology, 13.07.2019 20:00