Engineering, 20.11.2021 06:30 hsjsjsjdjjd

It is desired to deliver maximum power to a loudspeaker from an audio amplifier has an 8 Ohm output impedance. You have two speakers, one is 8 Ohm and another is 16 Ohm. Compare the difference in power delivered to the loudspeaker that provides maximum power to that which is not matched to the amplifier.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, johnthienann58

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

continue

Engineering, 04.07.2019 18:10, 0436500

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.

Answers: 1

continue

Engineering, 06.07.2019 03:10, netflixacc0107

Consider two concentric spheres forming an enclosure with diameters of 12 cm and 18 cm the spheres are maintained at uniform temperatures ti-50°c and t2 = 250°c and have emissivities .45 and .8, respectively. determine the net rate of radiation heat transfer between the two spheres per unit surface area.

Answers: 1

continue

Engineering, 06.07.2019 05:10, aaronolivera200161

Air contained in a piston-cylinder assembly undergoes a process from an bar. the initial pressure of 1 bar and temperature of 400 k to a final pressur initial volume of air is 0.2 m3. the process is described by pv- constant. assuming ideal gas behavior and neglecting kinetic and potential energy effects, determine the a)-mass of air, in kg b)-work for the process, in kj c)-heat transfer for the process, in kj pts

Answers: 1

continue

You know the right answer?

It is desired to deliver maximum power to a loudspeaker from an audio amplifier has an 8 Ohm output...