Engineering, 30.10.2021 07:50 sineguguhopengw3912

10 points) If a filter has unity gain (i. e. 0 dB) in its passband, you know that the frequency at which the output has half the amplitude of the input is known as the cutoff frequency. Hence, the gain is -3 dB at the cutoff frequency. However, if the maximum gain in the passband is not 0 dB, the cutoff frequency is the point where the gain is 3 dB lower than the maximum gain. When measuring cutoff frequency from a Bode plot, if you notice that the maximum gain is 8 dB, then what is the gain at the cutoff frequency?

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, niicoleassssssf

Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86

Answers: 2

continue

Engineering, 04.07.2019 18:20, cristykianpour

Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?

Answers: 2

continue

Engineering, 04.07.2019 18:20, annette211pdd8v9

For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.

Answers: 1

continue

Engineering, 04.07.2019 18:20, 3076850

Prove the equivalence between the two statements of the 2nd law of thermodynamics (i. e., a violation of one statement leads to the violatio the other statement)

Answers: 2

continue

You know the right answer?

10 points) If a filter has unity gain (i. e. 0 dB) in its passband, you know that the frequency at w...