Engineering, 19.10.2021 06:50 penajay

All of the following statements related to the PDS "Check Sheet" are correct, EXCEPT: 1: The Pre-Delivery Service process and the "Check Sheet" consist of six parts, Before Inspection:
Functional Operation; Walkaround Inspection; Under Hood; Under Vehicle (On Hoist); Road Test.

2: The "PDS Bulletin" (master document) for the vehicle serviced includes a "hyperlink" to the PDS
"Check Sheet" for the vehicle designated in the TIS search.

3: Page two of the "Check Sheet" describes more detailed instructions for performing some of the
operations required during PDS.

4:The "Check Sheet" may have hyperlinks to Repair Manual procedures.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, jesuslovesusall3

Courses that are developed by subject matter experts, internal or extemal to the college or university. these programs are marketed by the school (clo2) marks a)-vocational schools b)-vendor training c)-colleges & universities d)-continuing education programs

Answers: 2

continue

Engineering, 04.07.2019 18:10, QueenLife4869

Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.

Answers: 3

continue

Engineering, 04.07.2019 18:20, jessie8022

Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.

Answers: 2

continue

Engineering, 04.07.2019 18:20, cxttiemsp021

Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.

Answers: 3

continue

You know the right answer?

All of the following statements related to the PDS "Check Sheet" are correct, EXCEPT: 1: The Pre-D...