subject
Engineering, 19.10.2021 01:00 liamgreene90

A mixture of hexane isomers (hexanes) is used in a parts cleaning and degreasing operation. A portion of the used solvent is recycled for further use by the following process. Used cleaning solvent containing 84.7 wt% hexanes, 5.1 wt% soluble contaminants, and the remainder particulates, is first filtered to yield a cake that is 72.0 wt% particulates and the remainder hexanes and soluble contaminants. The ratio of hexanes to soluble contaminants is the same in the dirty hexanes, the filtrate, and the residual liquid in the filter cake. The filter cake is then sent to a cooker in which nearly all of the hexanes are evaporated and later condensed. The condensed hexanes are combined with the liquid filtrate and then recycled to the parts cleaning operation for reuse. The cooked filter cake is further processed off site. a. How many lbm of cooked filter cake are produced for every 100 lbm of dirty solvent processed?
b. What is the weight percent of soluble contaminants in the cooked filter cake?

ansver
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 15:10, theamandawhite
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
image
Engineering, 04.07.2019 18:10, abdirahmansoloman
Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?
Answers: 1
image
Engineering, 04.07.2019 18:10, lillygrl100
For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater
Answers: 3
image
Engineering, 04.07.2019 18:20, luisgonz5050
Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k
Answers: 3
You know the right answer?
A mixture of hexane isomers (hexanes) is used in a parts cleaning and degreasing operation. A portio...

Questions in other subjects:

Konu
Mathematics, 22.03.2021 18:20
Konu
World Languages, 22.03.2021 18:20