Engineering, 09.10.2021 17:00 beccca16

A jeweler wishes to produce 20 gold rings in one investment-casting operation. The wax parts are attached to a wax central sprue with a 20-mm diameter. The rings are located in four rows, each 15 mm from the other on the sprue. The rings require a 3-mm diameter, 12-mm long runner to the sprue. Estimate the weight of gold needed to completely fill the rings, runners, and sprues. Assume a typical ring has a 25-mm outer diameter, 19-mm inner diameter, and 5-mm width. The specific gravity of gold is 19.3.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, volleyballfun24

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

continue

Engineering, 03.07.2019 23:20, abbz13

Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct

Answers: 3

continue

Engineering, 04.07.2019 18:10, ashleybaber4966

If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79

Answers: 1

continue

Engineering, 04.07.2019 18:10, winterblanco

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

Answers: 3

continue

You know the right answer?

A jeweler wishes to produce 20 gold rings in one investment-casting operation. The wax parts are att...