Engineering, 08.10.2021 18:50 rodriguezzamyy

A frictionless pulley attached to a block of mass 11 =100 kg spans a string with a cylinder of mass 22. The coefficient of friction between the inclined surface and the block at an angle θ = 20° is = 0.2. Find the minimum and maximum mass of the cylinder that can maintain equilibrium without the block going down or up along the slope. The frictional force acts opposite to the tangential direction in which the object is about to move and has a maximum value of = when the slide is imminent. N is a normal reaction force.

A frictionless pulley attached to a block of mass 11 =100 kg spans a string with a cylinder of mass

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, cowgyrlup124

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Answers: 1

continue

Engineering, 04.07.2019 16:10, TheOriginalMeyah

An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)

Answers: 2

continue

Engineering, 04.07.2019 18:20, 1230bering

Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives

Answers: 2

continue

Engineering, 04.07.2019 18:20, aly95

An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid

Answers: 3

continue

You know the right answer?

A frictionless pulley attached to a block of mass 11 =100 kg spans a string with a cylinder of mass...