Engineering, 06.10.2021 17:00 ks970065

lows m 2 minutes i) A portable machine requires a force of 300N to move it. How much work is machine is moved 20m and what average power is utilized if the movement j) A mass of 2000My is raised through a height of 10m in 20ms. What is (i) the work done MO (ii) the power developed? 10 k) Find the accelerating force when acceleration of Sm/s?. Daving a mass of 1.7Mg increases its spee 2. Use the following Data to answer the Ving questions Iv(v) 2 | (mA) 10. 12 14 I(A) Dio o. ols 6 8 16 0.oll

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 19:20, carterdaw

Aseries piping system conveys methyl alcohol. the system consists of 70 m of 1- nominal pipe follow by 50 m of 2-nominal pipe, both schedule 40 commercial steel. the 1-nominal pipe contains 3 90° elbows (regular) anda fully open gate valve, all threaded. the pressure drop through the system is 150 kpa. determine the volume flow rate through the system that is horizontally laid.

Answers: 1

continue

Engineering, 05.07.2019 23:20, neisha2507

Which one of the following faults cause the coffee in a brewer to keep boiling after the brewing cycle is finished? a. an open circuit in the heating element b. a short circuit at the terminals c. welded contacts on the thermostat d. a leak around the gasket

Answers: 3

continue

Engineering, 06.07.2019 02:30, heavenwagner

A12 mm diameter shaft runs in a plain cylindrical bush 30 mm long that is located in an 18 mm diameter hole in a housing. the shaft-inner bush fit is h8 f and the outer bush-housing fit is h7-p6. make a fully cimensioned sketch of the bush with tolerances. find the maximum and minimum clearance or interference for both fits on the inner and outer diameters of the bush

Answers: 3

continue

Engineering, 06.07.2019 03:10, liliauedt

Explain the strain-hardening phenomenon on the basis of dislocation - dislocation strain field interactions. also, briefly describe what generally happens to the ductility of a metal that has been strain hardened (i. e. does strain hardening make a metal more ductile or

Answers: 3

continue

You know the right answer?

lows m 2 minutes i) A portable machine requires a force of 300N to move it. How much work is machine...