Engineering, 21.09.2021 14:00 gothicleonardogal

1. Soil: Soil 2. Radial Lines: Radial Lines 3. Concentric Lines: Concentric Lines 4. Density Gradient Tube: Density Gradient Tube 5. Tempered Glass: Tempered Glass 6. Stress marks: Stress marks Column B a. any disintegrated surface material, both natural and artificial, that lies on or near the earth's surface b. glass fractures lines which form on the surface opposite that of the penetrating force c. glass tubes 6 to 10 mm in diameter and from 25 to 40 cm in length filled with layers of different densities. d. glass which as been tempered so as not to crack or slither in the fashion of normal glass e. white fracture lines which are observed microscopically on a cross section of glass f. glass fractures lines which form on the same side as the penetrating force

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, DestyHilBan1183

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

continue

Engineering, 04.07.2019 18:10, lerasteidl

Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?

Answers: 3

continue

Engineering, 04.07.2019 18:10, tobyhollingsworth178

Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer

Answers: 2

continue

Engineering, 04.07.2019 19:10, Destinationz

Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?

Answers: 3

continue

You know the right answer?

1. Soil: Soil 2. Radial Lines: Radial Lines 3. Concentric Lines: Concentric Lines 4. Density Gradien...