Engineering, 12.09.2021 02:20 autumn8668

Which of these best describes a programming language? A set of rules where symbols represent actions.
A set of spoken commands for a robot.
An action performed by a robot.
A list of behaviors the robot already completed.

What is the name for an action performed by the VR Robot?
Command
Behavior
Parameter
Programming Language

How do you change the behavior of the VR Robot?
Change the programming language.
Name and save your project.
Change the programming blocks called commands.
Change the Playground.

How far will the VR Robot move based off of this command?
200 millimeters (mm)
400 millimeters (mm)
500 millimeters (mm)
300 millimeters (mm)

What part of the block do you select to change the direction of the [Drive for] block?
1
2
3
4

What is the default velocity of the VR Robot?
0%
50%
25%
75%

What is the maximum velocity setting for the VR Robot?
50%
150%
100%
200%

How will the VR Robot move based off of this command?
Turn left 80 degrees.
Turn right 90 degrees.
Turn left 90 degrees.
Turn right 80 degrees.

Which block turns the VR Robot to a given clockwise heading?
[Turn to heading]
[Turn]
[Set drive rotation]
[Turn to rotation]

What order will the buildings on the Castle Crasher Playground be knocked over according to this project?
1, 2, 3, 4, 5
3, 2, 5, 4, 1
3, 1, 4, 5, 2
5, 2, 1, 4, 3

Which of the following is the best description of what the VR Robot will do based on this project?
The VR Robot will drive forward 1000 millimeters (mm) at maximum velocity. It will turn right 180 degrees and drive forward 1000 millimeters (mm).
The VR Robot will drive forward 1000 millimeters (mm) at maximum velocity. It will turn right 90 degrees, set velocity back to the default, and drive forward 1000 millimeters (mm).
The VR Robot will drive forward 1000 millimeters (mm) at maximum velocity. It will turn right 180 degrees, set velocity back to the default, and drive forward 1000 millimeters (mm).
The VR Robot will drive forward 1000 millimeters (mm) at maximum velocity. It will turn left 180 degrees, set velocity back to the default, and drive forward 1000 millimeters (mm).

Why is it important to correctly sequence commands in a project?
To make a project that works as intended.
To make the VR Robot skip around to random commands.
To have accurate values and parameters in commands.
To make a project that does not work as intended.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, ahmedeldyame

Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.

Answers: 1

continue

Engineering, 04.07.2019 18:10, qwertylol12345

Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.

Answers: 2

continue

Engineering, 04.07.2019 18:10, ijohnh14

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way

Answers: 2

continue

Engineering, 04.07.2019 18:10, tobyhollingsworth178

Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer

Answers: 2

continue

You know the right answer?

Which of these best describes a programming language? A set of rules where symbols represent actio...