subject
Engineering, 07.09.2021 04:50 kell22wolf

1.a) The electricity consumed in kwh/unit of 50 household of a certain community were as follows.68, 84, 73, 82, 68, 90, 62, 88, 76, 93, 73, 79, 75, 60, 93, 71, 59, 85, 75, 61, 65, 88, 87, 74, 62, 95, 78, 63, 72, 66, 78, 75, 75, 94, 77, 69, 74, 68, 60, 96, 78, 82, 51, 52, 53, 61, 75, 95, 98 and 60.From the above information i) construct the grouped frequency distribution having suitable class and class interval ii) draw a less than ogive and find the percentage of families who consumed 60 unit or below iii) find third quartile graphically.

ansver
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, anna22684
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
image
Engineering, 04.07.2019 18:20, maustin5323
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
image
Engineering, 04.07.2019 19:20, GusGus11
The power source in a certain welding setup generates 3500w that is transferred to the low carbon steel work with a heat transfer factor of 0.85. the melting factor in the operation is 0.45. a continuous fillet weld is to be made with a cross-sectional area of 23 mm2 determine the travel speed at which the welding can be accomplished.
Answers: 3
image
Engineering, 04.07.2019 19:20, jimena15
The quality is zero at a)-the saturated vapour state b)-the saturated liquid state c)-the saturated liquid-vapour mixture state d)-none of the states in the other answers
Answers: 3
You know the right answer?
1.a) The electricity consumed in kwh/unit of 50 household of a certain community were as follows.68,...

Questions in other subjects:

Konu
Mathematics, 05.01.2021 16:50