Engineering, 07.09.2021 01:20 candymorgan81

This project involves designing and using filters to separate voice from a signal which is a mix of voice and music (single instrument). What is meant by design is finding appropriate coefficients of a LTI system described by a difference equation that relates the output signal (music eliminated signal) to the input signal (mix of voice and music). This process is to be carried out in a two-step manner, i. e. first designing a lowpass filter to separate frequency components below 4kHz (voice) and then designing a notch filter to get rid of high amplitude frequencies of the music below 4kHz.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 19:30, 10040813

When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line

Answers: 3

continue

Engineering, 04.07.2019 18:10, mm016281

What difference(s) did you notice using a pneumatic circuit over hydraulic circuit. explain why the pneumatic piston stumbles when it hits an obstacle.

Answers: 2

continue

Engineering, 04.07.2019 18:10, aliopqwas

Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.

Answers: 1

continue

Engineering, 04.07.2019 18:20, aly95

An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid

Answers: 3

continue

You know the right answer?

This project involves designing and using filters to separate voice from a signal which is a mix of...